| Power over Ethernet (PoE) Power Injector, Intellinet 524179Product DetailsFeatures:
- Ideal when AC power is not available
- Full-power Class 3 PoE design
- Power output of up to 15.4 Watts
- Supports all IEEE 802.3af-compliant PoE devices (Wireless LAN
access points and bridges, VoIP (Voice over Internet Protocol)
telephones, IP surveillance cameras)
- Supports IEEE 802.3af detection and short circuit, overload
and high-voltage protection
Color:
Specifications:
- Standards
- IEEE 802.3af (Power over Ethernet)
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX Fast Ethernet)
General
- Media support:
- 100Base-TX Cat5 UTP/STP RJ-45, 8 pin
- Ports:
- 1 RJ-45 100 Mbps input port
- 1 RJ-45 100 Mbps data and power output ports
- 1 power input connector (3 pin)
- Protection functions:
- Short circuit protection for short GND
- Overload protection for currents over 450 mA
- High-voltage protection for output voltage exceeding 52 V
- Compatibility - general: all IEEE 802.3af-compliant PoE
devices
- Supported INTELLINET NETWORK SOLUTIONS products:
- Wireless 300N Access Points (524735, 524711)
- High Power Wireless G Access Point (503082)
- PoE Splitter (502900)
- Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30,
550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
- Certifications: FCC Class B Part 15, CE 89/336/EEC
RJ-45 Input Connector Pinout
- Pin 1: Rx+ (data receive)
- Pin 2: Rx- (data receive)
- Pin 3: Tx+ (data transmit)
- Pin 4: NC (not connected)
- Pin 5: NC (not connected)
- Pin 6: Tx- (data transmit)
- Pin 7: NC (not connected)
- Pin 8: NC (not connected)
RJ-45 Output Connector Pinout (Data + Power)
- Pin 1: Rx+ (data receive)
- Pin 2: Rx- (data receive)
- Pin 3: Tx+ (data transmit)
- Pin 4: -Vdc_return (+) (feeding power [+])
- Pin 5: -Vdc_return (+) (feeding power [+])
- Pin 6: Tx- (data transmit)
- Pin 7: -Vdc (feeding power [-])
- Pin 8: -Vdc (feeding power [-])
LEDs
- AC Powered (Red)
- Channel Powered (Green)
Power
- Input: 100 to 240 V AC, 50 to 60 Hz
- Output: 48 V DC / 350 mA
- Power consumption: 19 Watts (maximum)
Environmental
- Plastic housing (ABS)
- Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
- Weight: 0.14 kg (0.3 lbs.)
- Operating temperature: 0 – 60°C (32 – 140°F)
- Operating humidity: 10 – 90% RH, non-condensing
- Storage temperature: -20 – 85°C (-4 – 185°F)
Package Contents:
Power Over Ethernet Injector
Power cable
Instruction sheet |