| Home > IDE to SATA or SATA to IDE Bi-Directional Adapter IDE to SATA or SATA to IDE Bi-Directional AdapterProduct Details
This is a bi-directional converter for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0.This converter supports 1.5GHz data rate
Specifications:
- Jmicro JM20330 Chipset
- Plug & Play and Hot-swapping capability
- 150MB/s transfer rate
- Automatic SATA 3.0/1.5 Gbps speed negotiation
- Serial-ATA 1.0 specification compliant
- Support Serial ATA hot-plug
- Support ATA Host Bridge
- Support ATA PIO and UDMA modes 0 to 4
- ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
- ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count
- Support 3.5" IDE hard drives and 5.25" optical drives
- Ultra low power consumption
- Work for both AC and DC couple between the transmitter and the receiver
- Provide specified OOB signal detection and transmission
- Support Spread Spectrum Clocking to reduce EMI
- Support Partial/Slumber power management
- Provide adjustable TX signal amplitude and pre-emphasis level
- Master/Slave mode support
System Requirements:
- Windows 98SE / ME / 2000 / XP Operating System
Package Content:
- Bi-directional Adapter
- SATA Cable
- Power Cable
|
 "IDE to SATA or SATA to IDE Bi-Directional Adapter")
;)
